You can consider your ipod Nano apart with a few of easy equipment and treatment whilst dealing with it. Familiarize your self with the elements of your ipod Nano prior to you start disassembly.
Issues You will Require
- Flat-head screwdriver or putty knife Phillips screwdriver (dimension 00)
Open the situation by utilizing a flat-head screwdriver or putty knife. Your ipod Nano ought to be dealing with up. Location the flat screwdriver in between the leading plastic situation and metal bottom circumstance, gently prying all the way about the ipod Nano till the bottom scenario arrives off. The bottom metal situation does not have any wires linked, so it can effortlessly be eliminated.
Eliminate the battery by gently prying it with a flat screwdriver. It is only held in Location by adhesive, so it ought to dislodge effortlessly. It is linked to the logic board by way of soldered wires. Consider treatment not to pull the wires loose.
Eliminate the logic board by getting rid of the 4 screws. 3 screws are situated close to the headphone jack and sync port; the fourth screw is toward the center of the board. The screws will be coated with both tape or a sticker. Use a little-sized Phillips screwdriver. Following getting rid of the screws, cautiously elevate up the logic board--taking treatment not to disrupt the connections located on the underside of the logic board.
Take away the front situation from the logic board by taking away the click on wheel cable. The cable is connected to the logic board by way of a connector. By flipping up the black piece on the opposite side of wherever the cable is heading into the logic board, You'll unlock the connector. This will let you to pull the cable out, and you can then Get rid of the front situation from the logic board.
Disconnect the LCD by flipping the black locking mechanism and gently pulling the cable out.
No comments:
Post a Comment