Apple items are identified for smooth and progressive layout. Hardly ever can you see a screw head, seam or slit in an Apple system. Although aesthetically satisfying, this sort of hardware style tends to make it tough to change a battery, LCD display, or headphone jack your self. With specified equipment that are obtainable on-line, though, it is feasible to disassemble an ipod with reasonable work. A reminder: taking apart an Apple item will void its guarantee.
Issues You will Require
- ipod plastic prying device Spudger Phillips 00 screwdriver
Slide the "Maintain" change, situated on the leading of the ipod, into the locked place.
Position your ipod plastic prying device in in between the outer, coloured layer and the white, plastic best (exactly where the Maintain button is positioned). Pry this white, plastic piece from the casing and eliminate it.
Pry the white, plastic piece from the bottom of the gadget, utilizing the exact same method as in Stage two. You'll encounter some resistance once pulling it off because of to a tiny volume of adhesive. Use minimum force if required.
Unscrew the 2 Phillips-head screws from possibly facet of the dock connector (situated on the bottom of the unit).
Unscrew the 2 further Phillips-head screws from the leading of the system.
Use a spudger or wiring device to separate the headphone jack from the ipod casing. Do not get rid of the headphone jack entirely--it really is connected to the click on wheel through a ribbon connector. The headphone jack will continue to be exterior of the casing but connected for the remainder of the disassembly.
Eliminate the screw that can now be located following to the dock connector, which was formerly concealed by the headphone jack.
Raise the metal housing piece that surrounds the dock connector and position it aside.
Maintain the ipod with the click on wheel going through in the direction of you and with the spudger meticulously separate the ribbon connecting the headphone jack and click on wheel from the logic board. You are going to Want to push the ribbon in the direction of you (towards the click on wheel) to separate it. Do not take away the headphone jack--it's nonetheless attached to the click on wheel.
Consider the spudger and use it to push the logic board from the bottom, out the top rated. The headphone jack will continue being attached; do not try to eliminate it. If you really feel the logic board pulling the headphone jack or click on wheel out of placement, do not push it any added. Make certain the ribbon connecting the click on wheel and headphone jack is fully separated from the logic board. Begin pushing the logic board out.
Grasp the LCD screen and logic board once it can be far sufficient out and gently end pulling it out the leading of the ipod.
Separate the metal bracket from the LCD screen. Be cautious not to harm or eliminate the obvious shielding on the LCD.
Raise the display screen but do not eliminate it. A ribbon connects the screen to the logic board. Use a fingernail or spudger to release the modest black tab keeping the screen ribbon down.
Gradually pull the ribbon from the logic board and take away the screen. Your ipod is now completely disassembled.
No comments:
Post a Comment