Ipod screens are quickly cracked or scratched if not dealt with very carefully or saved in a protective circumstance. For ipod Nano entrepreneurs who Need to save time and income by employing their individual ipod restore instrument kits, correcting an ipod Nano screen can be a quick and effortless approach. Correcting the ipod screen also saves the operator the headache of getting a brand name-new ipod.
Issues You will Require
- Little Philips screwdriver Nylon device Tiny flat-head screwdriver, knife or T-six Star Driver
Insert the nylon device into the groove situated on the lengthy aspect of the ipod. Slide it along the edge of each sides till you are in a position to separate both plates.
Put aside the back again plate. Cautiously elevate the battery from its slot to accessibility the screws beneath (do not reduce the battery wires if you are not changing the battery). Peel back again the protective movie covering the primary board and use the Philips screwdriver to eliminate the 3 Modest screws surrounding the principal board.
Use the flat-head screwdriver to pry open the major board roughly one/4 inch. Separate the screen from the primary board by relocating the keeping clips away from the board.
Slide the screen out so that a part is sticking out the leading of the ipod. Flip the ipod on its back again and get rid of the faceplate. Consider out the ipod screen by flipping up the black tab keeping down the ribbon cable connector. Get out the current connector and change it with the new screen ribbon by locking down the black tab.
Insert the new ipod screen by putting it on the primary board. Location the major board back again into the ipod plate and substitute the 3 screws to lock it in Spot. Put the battery back again into its authentic placement.
Examine to make certain that the plate's metal tabs are pushed down. Slide the ipod's maintain button so that it is aligned with the plate's grooves. Shut each plates with each other.
No comments:
Post a Comment