The fourth era ipod Nano is a transportable, compact and very innovative media player. Disassembling it enables you to substitute a failed battery or repair a loose headphone plug, but it can not be taken apart as extensively as other types since of the way the electronics are soldered collectively. All you want is a single device obtained from an ipod provide retailer. The method is not challenging, but any guarantee that is in result will be violated.
Items You may Need to have
- Soft cloth ipod opening instrument Phillips jeweler's screwdriver Flat-edged jeweler's screwdriver
Area a soft cloth on a table. Lock the ability change. Location the Nano experience down on the cloth, with the LCD display screen farthest from you.
Insert the opening instrument into the top rated of the Nano involving the circumstance and the bezel. Pull the leading bezel off the leading of the instrument.
Repeat this technique on the bottom and take away the bottom bezel.
Eliminate the two screws that are now uncovered on the bottom with the Phillips screwdriver. Insert the suggestion of the flat-edged screwdriver in between the dock module in the bottom and the facet of the Nano.
Raise up on the suggestion to loosen the dock module. Pull the module out of the bottom. Eliminate the screw that is now unveiled at the bottom.
Push the circuit board halfway out of the Nano's situation from the bottom with the suggestion of a screwdriver.
Push the LCD panel and the glass in front of it out of the Nano's situation.
Get to inside of the circumstance and grab the cable connected to the click on wheel module. Pull the cable's plug off the circuit board.
Pull the circuit board out of the circumstance. Location the circuit board on the soft cloth with the electronics going through up.
Slide the "Maintain" change tab gently off the top rated conclude of the circuit board. Push the click on wheel module out of the scenario.
No comments:
Post a Comment