Friday, October 7, 2011

Disassemble a 2nd Generation 4GB iPod Nano

The 2nd era (2G) 4-gigabyte (4GB) ipod nano was launched in 2006 and is a smaller sized, smaller edition of the traditional ipod. Simply because of its diminutive size the 2G nano is even much more susceptible to harm than other other ipod designs. Even dropping your nano as soon as or twice can end result in everlasting injury. The very good news is that if you have located by yourself with a damaged ipod you can disassemble it by yourself in buy to exchange areas.

Items You may Need to have

    ipod nano Circumstance opener instrument Small Phillips screwdriver

    Insert the suggestion of your Circumstance opener instrument (offered from any electronics keep) in the seam involving your ipod nano and the skinny rectangular cover that sits on top rated of it. Operate your way along the facet of this top rated cover right up until it pops off.

    Flip the instrument over and repeat the approach to take away the bottom cover from the Nano. Then use your small Phillips screwdriver to take away the two screws on the bottom of the instrument in the vicinity of the headphone jack.

    Insert the suggestion of your screwdriver just underneath the headphone jack assembly and gently pry it up. Be watchful not to fully eliminate it as there are even now wires related to it. When the jack is out of area it will expose a single screw below.

    Use your screwdriver to take away the single screw underneath the headphone jack. Then use the suggestion of your screwdriver to pop the skinny metal frame out from the bottom of the nano.

    Flip the nano appropriate-facet up and eliminate the two screws from possibly conclude of the skinny metal frame on the leading of the tool. Then insert the suggestion of your finger in the bottom of the nano and slide the motherboard and display screen assembly up and out of the housing. Set the housing aside.

    Raise the LCD display screen up from the motherboard and use your fingers to unplug the thick connector ribbon from the bottom corner of the display. Set the display screen aside and your nano is fully disassembled.

No comments:

Post a Comment