The Nano is a single product from the ipod mp3 player household developed by Apple. The fourth era of this product characteristics a prolonged slim situation and a little, square touch LCD display on the front. All of the internal workings of the ipod are contained in a couple of little elements inside the situation. If you have a fourth-era Nano and require to disassemble it, you can effortlessly do it your self in a fairly brief quantity of time.
Issues You will Require
- Guitar choose Jeweler's Philips screwdriver Jeweler's slotted screwdriver
Pry off the white plastic bezel on the leading and bottom of the ipod utilizing a guitar choose. The bezels will unclip from the Nano, so maintain your fingers over them to quit them from flying away from you.
Consider the energy change from beneath the leading bezel and set it aside. It will be unsecured to something as soon as the bezel is eliminated.
Eliminate the two modest screws on the top rated and the 3 on the bottom of the ipod with the Philips screwdriver. Pry off the metal piece on the bottom of the ipod utilizing the suggestion of a jeweler's slotted screwdriver.
Elevate the leading metal piece out of the best of the ipod by gently prying it upward. It will Take caught once it is approximately a single-fourth inch out of the circumstance by the change on the back again of the ipod.
Pull the change on the back again of the ipod away and proceed to pull the contents out of the situation. Quit pulling as soon as you can see the cables inside appropriate under the bottom edge of the LCD display.
Compress the bottom edge of the glass above the display screen into the scenario with your fingers. You'll be able to use the flat instrument to pry the glass off from the best edge and Consider the glass away from the ipod.
Elevate the ribbon wire connecting the reduced-left corner of the display to the in of the ipod. This will disconnect the wire and let you to very carefully pull the internal components fully out of the scenario.
Slide the flat device involving the battery and the back again of the Nano scenario to separate them. The moment the battery is lifted up, you can start off to push it down out the bottom of the situation right up until the locking cable is visible along the bottom of the battery.
Get off the locking cable by lifting it up, and make confident no glue is keeping it in area. Slide the battery out the relaxation of the way from the scenario.
Slide the flat device among the front of the situation and metal backing plate of the clicker wheel to separate them. Push the clicking wheel down by way of the bottom of the scenario.
No comments:
Post a Comment