The ipod Nano, whilst changed by more recent Apple designs, is nonetheless a well-liked audio player for these who very own it. Changing the battery ensures that sufficient energy will be provided to the electronics, and can be carried out by the proprietor searching to steer clear of the price and time misplaced in sending it in to a support middle. A substitute Nano battery bought from an ipod shop and some popular hardware equipment are all that is required, as is above an hour of time. You'll also require some expertise in utilizing a soldering iron in purchase to change the ipod Nano's battery.
Issues You will Need to have
- Soft towel ipod Nano alternative battery Putty knife Tweezers Soldering iron Solder
Put the soft towel down on a table. Put the ipod Nano down encounter up on the soft towel. Insert the putty knife in between the aspect of the ipod Nano tween the front and back again shells. Move the putty knife down the duration of the ipod Nano to release the tabs keeping the two shells with each other. Repeat this process on the other facet, the bottom and at the leading of the ipod Nano.
Separate the back again shell from the front shell employing your fingers. Put the back again shell aside. Put the front shell down on the towel with the electronics board dealing with up.
Use the tweezers to pull off the tape covering the 3 wires of the battery exactly where they connect to the circuit board.
Warmth the soldering iron. Touch the suggestion of the soldering iron to every single of the 3 wires coming from the ipod Nano's battery wherever they connect to the circuit board to loosen them. Use the tweezers to pull the wires off from the circuit board.
Use your fingers to eliminate the tape keeping the front end of the ipod Nano's battery to the circuit board. Take away the ipod Nano's battery and discard it appropriately.
Place the ipod Nano substitute battery into the placement now vacant on the circuit board. Attach the tape to the front end. Soldering the 3 wires from the Pod Nano alternative battery to the 3 contacts on the circuit board. Permit the solder cool.
Put the tape back again over the 3 wires. Reassemble the ipod Nano.